Maintenance Of Hardware On Aluminum Alloy Boats

The hardware is inconspicuous parts on the aluminum alloy boat, but it plays a big role in the use of the aluminum alloy boat. Coupled with some harsh environments at sea, maintenance of hardware is equally important.

First, check the wearing parts, such as the hardware on the impeller, retaining ring, shaft sleeve, and bearing seat of the submersible pump. The part of the pump should be removed and the consumables should be checked for integrity. The use of damaged and unqualified parts is strictly prohibited. The damaged hardware should be replaced in time, and the rusted hardware should be removed.

Secondly, it is necessary to apply a better wax protective layer on the surface of the hardware, and the wax should be applied every two months. Because the wax film can resist the erosion of seawater, increase the gloss, and make subsequent maintenance easier.

Thirdly, the oil hole screws in the sealed room and the motor must be opened separately, and all the lubricating oil in the sealed room and the motor should be released, and replaced with new oil to ensure the normal operation of the lubrication system.

For personal safety, the maintenance knowledge of the above aluminum alloy boat hardware is important, I hope you pay attention